B1, B2
The Basic Tool Support with Stationary Boom for
a multitude of uses
Use
individually or in combination with other models for added
flexibility. Specify boom length: 18”, 24”, 30” by part
number
Options: bench clamps; balancers;
torque reaction arm.
B1-S, B2-S
A swivel tool support
One of our most popular models with over
5’ of reach at the work station. Swivels 360° Specify boom
length: 18”, 24”, 30” by part number
Options: bench clamps; balancers; torque reaction arm.
|
|
AIR & ELECTRIC TOOL SUPPORT
SYSTEMS
- 1” sq., l8 gauge tubing
- Overall height: 37” for B1, 43”
for B2
- 3 standard boom lengths
- Polished chrome finish
- 3” sq. welded base for mounting;
screws provided
- Sliding tool positioner provided;
internal trolley option for booms
- Balancers and tools available
separately
Models (37”H)
B1-18
B1-24
B1-30
B1-S-18
B1-S-24
B1-S-30 |
Models (43”H)
B2-18
B2-24
B2-30
B2-S-18
B2-S-24
B2-S-30 |
|
|
|
The Most Efficient Assembly Area Support for Air Tools with Swivel Boom
Equipped for rapid set-up and instant
tool changes by hand, including a mounted, quick-disconnect
coupling, 12’ coil hose with adapter for air tool, and 6’ limp
hose with 1/4” swivel male inlet for hook-up to in-house air
supply. Specify boom length: 18”, 24”, 30” by part
number
Options: bench clamps; balancers;
torque reaction arm.
Models (37”H)
B1A-S-18
B1A-S-24
B1A-S-30
|
Models (43”H)
B2A-S-18
B2A-S-24
B2A-S-30
|
B1E, B2E
A Basic Tool Support with Stationary Boom for Electric Tools
Provided with tool
positioner and 3 clamps to keep cord out of way. Specify boom
length: 18”, 24”, 30” by part number
Options:
bench clamps; balancers; torque reaction arm.
B1E-S, B2E-S
An Electric Tool Support with Swivel Boom
Provided with 3 cord clamps
and tool positioner. Specify boom length: 18”, 24”, 30” by
part number
Options: bench clamps; balancers;
torque reaction arm.
Models (37”H)
B1E-18
B1E-24
B1E-30
B1E-S-18
B1E-S-24
B1E-S-30
|
Models (43”H)
B2E-18
B2E-24
B2E-30
B2E-S-18
B2E-S-24
B2E-S-30
|
|
|
 |
- B1A-S-FRL, B2A-S-FRL
The Most Complete Assembly Area Support for Air Tools
For quick monitoring and
control of air pressure, filtration, and lubrication, equipped
with filter, regulator, gauge, and lubricator to reduce tool
maintenance and down time. Supplied with quick-disconnect
coupling, 12’ coil hose with adaptor for air tool, and 6’ limp
hose with 1/4” male inlet for hook-up to in-house air supply. FRL
factory installed. Specify boom length: 18”, 24”, 30” by part
number
Options: bench clamps; balancers; torque
reaction arm.
Models (37”H)
B1A-S-FRL-18
B1A-S-FRL-24
B1A-S-FRL-30
|
Models (43”H)
B2A-S-FRL-18
B2A-S-FRL-24
B2A-S-FRL-30
|
|
|
- B1A-T, B2A-T
A Stationary Tool Support for Multiple Tools, One Operator
An 18” deep boom with two
9” tees that separate the tools. Equipped as shown, with built in
air supply, quick disconnect couplings, 2-12’ coil hoses with
adapters for air tools, and 6’ limp hose with 1/4” male inlet for
hook-up to in-house air supply.
Options: bench
clamps; balancers; torque reaction arm.
- B1E-T, B2E-T
A Basic Tool Support for Multiple Electric Tools
Same as B1-T or B2-T and
provided with six clamps to keep cord out of the
way.
- B1A-T-FRL, B2A-T-FRL
Same as B1A-T or
B2A-T with factory installed filter, regulator, gauge and
lubricator
- B1-T, B2-T
A Basic Tool
Support for Multiple Tools
Same as B1A-T or
B2A-T without air accessories.
|
|
|