Nascomatic Feeders and Presenters

standard options | drivers | configurations| jaw units

Tool Support Systems


Nasco Industries • 3541 N.W. 53rd Street • Ft. Lauderdale FL 33309
: 1-954-733-8665 • Toll Free: 1-800-9-NASCO-9
Fax: 1-954-733-8669 • Email:


Screwfeeders and Presenters
Overhead Runway Tool Supports
Tool Balancers and Load Positioning Systems
Torque Wrenches and Drivers


FLOW SENSOR: Detects when preset torque is reached.

RING SENSOR: For detecting screw present.

LOW TRACK SENSOR: Indicates insufficient screw reserve in the track.

PISTOL GRIP ADAPTER: Creates a pistol grip drive configuration with ideal tool balance for an in-line tool.

ROTATING CLUTCH HOUSING: Allows rotation of the driver nosepiece to clear obstructions.

2001 TRAP DOOR BOWL: For quick fill and clean-out of bowl feeder.

DUAL DROP TRACK: Feeds screws from one bowl feeder to two different drivers.

AUTO SHUT-OFF: For 2001 system, stops bowl rotation and track vibrator after a predetermined time when screwdriver is not in use.

QUICK RELEASE BOWL/TRACK: Allows instant changeover of bowl and/or track assemblies to accommodate different fastener sizes.

PATENTED MULTI-PORT MANIFOLD: Combines the outputs of a quantity of feeders with different fastener sizes into a single blowfeed line.

IN-LINE AUTO EXTEND DRIVER: For multiple fixture mounted driver applications, allows close centerline mounting of drivers.

CLEAN ROOM FEEDERS: Automatic screwfeeding systems with electric drivers for class 100 clean rooms.

PLC CONTROL: Provides sensor management, sequential programming for automated systems and system communication.

Note: Sensors normally require operation with a PLC.